YUNYAN-Good Quality Double Component Super Adhesion C2TES2 Tile Adhesive-1
Double Component Super Adhesion C2TES2 Tile Adhesive
YY-116A
Scope of Application
It is suitable to fix the large size of stone or marble onto the wall and floor of conventional substrates, precast concrete panels, concrete, cement renders/screeds.
It can be applied directly onto the surface of porcelain tile or mosaic.
Indoor and outdoor use.
Service: One stop solution package service.
Payment: 50% of total amount for deposit, balance before load.
Place of origin: Guangdong, China(mainland).
Supply ability: 100,000kgs per day.
Usage: 1.2kg/mm/㎡.
Material: Polymer cement based.
| CAS# | Chemical Name | % |
|---|---|---|
|
65997-15-1 |
Portland Cement 42.5 |
30-40 |
|
14808-60-7 |
Silicone sand 70-140 |
50-60 |
|
Mixture |
Polymer Additive |
20 |
Delivery: 15-20 days.
Packing: 25kg/bag powder+5kg/additvie latex.
MOQ: 500sets.
|
Technical Data |
|
|
Status |
double component |
|
Powder |
Gray or white |
|
Pot life |
60min @25℃ |
|
Setting time |
≥4hours |
|
Construction |
Scrape |
|
Initial tensile adhesion strength |
2.0Mpa |
|
Initial tensile adhesion strength after water immersion |
1.7Mpa |
|
Open time: Tensile adhesion strength after not less than 10min |
3.0Mpa |
|
Open time: Tensile adhesion strength after not less than 20min |
2.8Mpa |
|
Extended open time: Tensile adhesion strength after not less than 30min |
2.7Mpa |
|
Tensile adhesion strength after freeze -thaw cycles |
1.5Mpa |
|
Tensile adhesion strength after heat aging |
1.7Mpa |
| Deform ability according to EN12004 | S1- Deform modulus |
|
Waterproof perfomance test |
Passed |
| Resistant to alkali | Excellent |
| Resistant to oils | Excellent |
| Resistant to solvents | Excellent |
|
Slip mm |
0.4 |
| Temperature when in use | -30℃- +90℃ |
| Mixing water ratio | Powder : latex=100kg: 20L |
| PH value | 12 |
|
Shelf life |
12 months |
|
Condition on site |
5-40℃ |
